Guide
Convert FBX to STL (Free Path via OBJ)
Updated · Mesh OBJ to STL only
FBX is not accepted here. Import FBX in Blender, export OBJ, convert privately to STL on this site, then open it in Bambu, Cura, or Prusa.
Convert FBX to STL via OBJ for Bambu, Cura, or Prusa
Import an Autodesk FBX in Blender, apply scale, export a Wavefront OBJ, convert that OBJ to a binary STL in the browser, and check the size in a slicer.
Step 1
Import the FBX in Blender
Open Blender and use File, Import, FBX (.fbx). Import only the mesh you intend to print. Animation, armatures, and cameras are not needed for a slicer.
Step 2
Apply scale and choose real-world size
Select the mesh and apply scale so the object scale reads 1, 1, 1. Decide what one Blender unit means for this part, and note a dimension you can verify later in millimeters.
Step 3
Export Wavefront OBJ
Use File, Export, Wavefront (.obj). Export the printable mesh. You do not need the MTL file for this converter. This site never reads the FBX itself.
Step 4
Convert OBJ to STL in the browser
Open the OBJ to STL tool on this site. Drop the .obj file. It is parsed on your device and is not uploaded. Set the unit menu to match how the OBJ was authored.
Step 5
Download binary STL
Read the bounding box in millimeters. Download the binary STL. ASCII is optional and off by default. No account is required.
Step 6
Open the STL in a slicer
Import the STL into Bambu Studio, UltiMaker Cura, or PrusaSlicer and confirm the millimeter size on the bed before you slice.
Autodesk FBX files show up constantly from game assets, marketplace kits, and DCC exports. Most FDM slicers do not want that file. They want a triangle shell they can place on a bed. This page is the free path from an FBX you already have to a binary STL you can open in Bambu Studio, UltiMaker Cura, or PrusaSlicer — without pretending this website reads FBX.
Important: objtostl.com converts OBJ → STL (and STL → OBJ) in your browser. It does not accept FBX upload. The path is Blender (or another modeler) → export OBJ → convert here → slicer. That is deliberate and honest. If a title or ad promised “upload FBX and download STL on this domain,” it would be wrong.
Why FBX is not slicer-ready
FBX is a scene interchange format. A single file can hold meshes, materials, skeletons, animation clips, cameras, and lights. That richness is useful in Blender, Maya, or a game engine. It is noise for a slicer. Bambu, Cura, and PrusaSlicer are built around printable geometry — almost always STL or another mesh that is already a static shell.
Even when an FBX contains “just a mesh,” the unit story is easy to get wrong. Autodesk pipelines often assume centimeters. Blender’s default scene unit is often meters. Your figurine may have been modeled as if the grid were millimeters. None of that is a bug in the file format; it is a reminder that scale is authorial, not something a slicer invents from the extension .fbx.
STL, by contrast, is a list of triangles with no materials, no UVs, and no unit label. That is why print prep almost always ends in STL (or a similar fabrication mesh). Converting FBX “directly” still means someone has to choose a pose, apply transforms, pick units, and emit triangles. Doing that in Blender, then finishing OBJ → STL here, keeps the choices visible instead of hiding them behind a black-box upload.
If you already know you need the print file from an OBJ, the shorter how to convert OBJ to STL guide is the slicer-focused version of the last half of this path. The OBJ vs STL page is the format decision when you are not sure what to keep.
Blender: import FBX, apply scale, export OBJ
Open Blender. Use File → Import → FBX (.fbx) and select the file. Import options vary by Blender version; the goal is a mesh you can see and measure. Skip cameras and lights if the importer offers that filter. If the asset is a rigged character, enter the pose you want to print, then apply the armature modifier (or export the evaluated mesh) so the OBJ contains the final surface, not a rest pose plus bones.
Select the printable object. In the Object properties, check Scale. If it is anything other than 1, 1, 1, apply scale (Ctrl+A → Scale on the default keymap) before you export. Unapplied scale is a common reason the STL size does not match the viewport.
Decide what one unit means. If you know the base should be 40 mm wide, remember that number. Blender will not write “millimeters” into an OBJ in a way every tool agrees on. You will match the unit again on this site’s converter. The millimeters vs meters guide exists because a 1000× error is the usual failure mode when a meter-scale scene meets a millimeter slicer.
Export with File → Export → Wavefront (.obj). Export the object you intend to print — not an entire lighting rig or a hidden duplicate. You can ignore the MTL file the exporter may write beside the OBJ. This converter does not read materials, UVs, or textures. Keep the FBX (and the OBJ + MTL) in your project folder if you still need the textured or animated source. The STL is a second file for the slicer, not a replacement for the scene.
Curves, text objects, and modifiers that have not been turned into a mesh will not become solid faces. Convert to mesh so the OBJ contains v lines and f lines. A file that is only points has nothing for an STL to store.
Convert OBJ to STL here
Open the OBJ to STL converter and drop the .obj file, or use the file picker. The page states the limit up front: 40 MB. A sculpt larger than that should be decimated, or you should export only the part you will print. The worker parses the file on your device. Nothing in this step uploads the mesh, and nothing in this step reads an FBX.
Leave millimeters selected when the OBJ was built in millimeters. Switch to centimeters, meters, or inches when that is the real unit of the exported numbers. Extra scale stays at 1 unless you truly want a resize on top of the unit conversion. The bounding box updates in millimeters. If you expected a 40 mm base and the box says about 40 × 40 × 40, you are in the right neighborhood. If it says 0.04 or 40000, stop and change the unit before you download.
Blender OBJ files are usually Y-up. Slicers treat Z as up. The default axis option rotates Y onto Z and can sit the lowest point on Z = 0 so the part rests on the bed. If your exporter was already Z-up, choose “Z up already” so the model is not laid on its side. The optional preview uses that same orientation. You can skip the preview; the STL does not depend on WebGL.
Binary STL is the download you want for Bambu, Cura, and Prusa. Leave the ASCII checkbox off unless you need text you can read in an editor. Binary vs ASCII STL explains why binary is the default. The button saves the file immediately. There is no account and no second step that unlocks it.
Open the STL in Bambu, Cura, or Prusa
Bambu Studio. Import the STL onto the plate you use for that printer. Read the size in the object panel before you slice. If the part is the right millimeters, orient it, add supports if the mesh needs them, and slice. If the size is off by about 10×, 25.4×, or 1000×, delete the object and rebuild the STL with the correct unit. Scaling “by eye” in the slicer and also scaling in the converter will stack, and the second print will be wrong in a new way.
UltiMaker Cura. Open the STL and watch the size in the tool panel. Cura’s default interpretation of STL is millimeters. An FBX that was exported to OBJ at meter scale without selecting meters on the converter will look like a speck — or, if the numbers were large, like a model that does not fit the bed. Compare the bounding box you already saw on the converter with Cura’s dimensions. They should agree within a small rounding error.
PrusaSlicer. Import, then confirm the size the same way. PrusaSlicer will also warn on some broken meshes. A warning here means the triangles were already problematic in the OBJ (and likely in the FBX). This converter did not stitch holes or flip faces. Take the mesh back to Blender, repair it, export OBJ again, and convert again. Do not expect the STL step to fix a non-manifold shell.
In all three slicers, trust a known dimension — not the fact that a file downloaded. A successful conversion only means the triangles were rewritten.
Limits of this path
This path does not accept FBX in the browser. It does not accept GLB or STEP in this version. (The reverse direction, STL to OBJ, does work in the browser, but it does not help with FBX.) It does not keep animation, bones, shape keys, materials, UVs, or vertex colors. A multi-object FBX kit should be exported as separate OBJs if you need separate print jobs; the converter merges faces into one STL triangle list.
Non-manifold edges, holes, inverted normals, and walls thinner than your nozzle survive conversion. The bounding box can look perfect while the slicer refuses the file. Repair in Blender first. The tool also does not invent watertightness.
Privacy is local: the OBJ is read in your tab. That is the opposite of an “upload FBX to our servers” service. If your asset is under a license that forbids redistribution, converting locally still does not grant you rights you never had — it only avoids sending the file to this site.
FBX vs OBJ vs STL cheat sheet
| FBX | OBJ (for this tool) | STL from this tool | |
|---|---|---|---|
| Typical job | Scene exchange, games, DCC | Mesh exchange, edit, export | Slice and print |
| Accepted here? | No | Yes | Download only |
| Animation / rigs | Common | Usually flattened on export | None |
| Materials / UVs | Common | Often present; ignored here | Dropped |
| Units | Metadata varies by app | Authorial; match the menu | Not stored; numbers treated as mm in slicers |
| Best next step | Import in Blender | Convert on the homepage | Open in Bambu / Cura / Prusa |
Use FBX while the asset is still a scene. Use OBJ as the bridge into this converter. Use STL when a slicer is the next app on the screen. Keep the FBX if you will re-pose or re-export. Keep the OBJ if you will edit the mesh again. Make a new STL when you change units or repair the mesh.
For the OBJ↔STL decision in more depth, see OBJ vs STL. For scale mistakes, see units: mm vs meters. For general converter questions, see the FAQ.
When the size looks right and the slicer opens the file, you are done with this site. The FBX never needed to leave your machine — and it never needed to be uploaded here.
Questions
Can I upload an FBX to this website?
No. The converter reads Wavefront OBJ (and STL, in its STL to OBJ mode). There is no in-browser FBX upload on this page or on the homepage. Export an OBJ from Blender (or another DCC), then convert that OBJ here.
Why not convert FBX straight to STL in one click?
FBX often carries animation, materials, cameras, and unit metadata that a print file does not need. Slicers expect a triangle shell. The honest free path is to freeze the pose you want in Blender, export OBJ, then write STL for the bed.
Will materials, UVs, or animation survive?
No. This converter drops materials, MTL files, UVs, vertex colors, and any notion of hierarchy or animation. The STL is a triangle list for slicing. Keep the FBX or OBJ if you still need the rich scene.
Why is the part tiny or huge in the slicer?
STL does not store a unit. Match the unit menu to the OBJ, then read the bounding box in millimeters. The millimeters versus meters guide covers the common 1000× mistake.
Do I have to use Blender?
No. Any app that can import FBX and write a Wavefront OBJ mesh can feed this converter. This guide spells out Blender because it is the common free path. The file still needs vertices and faces.
Related guides
- How to convert OBJ to STLBlender export, this converter, then Bambu, Cura, or Prusa.
- OBJ vs STLWhen to keep the OBJ and what an STL throws away.
- Units mm vs metersWhy a print can come out 1000× too big, and how to check the box.
- Binary vs ASCII STLWhy the download defaults to binary STL.
- FAQPrivacy, size, textures, STEP, and image files.
- What is an OBJ fileWavefront OBJ, faces, and the MTL file we do not read.
- STL to OBJ converterTurn a binary or ASCII STL into a Wavefront OBJ in your browser. No upload.